Scanning in Single Feed Mode
1 Lift up the pick roller unit.
Push up the tab in the middle with your finger.
The pick roller unit will click into place.
The hopper moves up to the feeding position.
ATTENTION
● Make sure that there is no document left on the hopper.
● Be careful not to get your fingers or any object caught when the hopper moves up.
2 Load a document on the hopper with the front side (scanning side) facing up.
Make sure not to place the document all the way in.
3 Scan the document with the image scanning application.
For details, refer to the manual or help of the image scanning application.
Various Ways to Scan
103
To Next Page
Loading...
