Scanning a Document Longer Than A3 Size
Depending on the resolution setting or the image scanning application, scannable document sizes may differ.
For details, refer to the manual or help of the image scanning application.
1 Load the document on the hopper.
For information on how to load documents, refer to How to Load Documents (page 49).
ATTENTION
To scan documents longer than A3 size, pull out the hopper extension and stacker extension all the way.
Also, make sure not to pull up the paper stop.
2 In the scanner driver, configure the scan settings to scan the paper size of the long page.
For details, refer to the help for the scanner driver.
3 Scan documents with the image scanning application.
For details, refer to the manual or help of the image scanning application.
ATTENTION
● Long page scanning cannot be used with the following functions:
- Multi Image Output
- Auto Color/Monochrome Detection
● Long Page Scanning supports scanning of documents with a length up to 5588 mm (220 in.) in the
feeding direction.
Note that the resolution must be set to the following dpi value depending on the document size.
- A length that exceeds Double Letter (432 mm) but does not exceed 863 mm
400 dpi or less
- A length that exceeds 863 mm but does not exceed 3150 mm
300 dpi or less
- A length that exceeds 3150 mm but does not exceed 5588 mm
200 dpi or less
- Multi image with a length that does not exceed Double Letter (432 mm)
400 dpi or less
Various Ways to Scan
101
To Next Page
Loading...
