Settings Related to Power ON/OFF Control
Setting the Paper Separation Force upon Turning the Power Off [Retain current
paper thickness]
Specify whether or not to memorize the paper separation force setting of the operator panel upon turning the power
off.
1 Start up the Software Operation Panel.
Refer to Starting Up the Software Operation Panel (page 193).
2 From the listing on the left, click [Device Setting 2] → [Retain current paper thickness].
3 Specify whether or not to memorize the paper separation force setting of the operator panel upon
turning the power off.
When [Remember] is selected, you can use the memorized setting next time the scanner is powered on.
Operational Settings
265
To Next Page
Loading...
