Setting the Function for Scanning Slowly at Low Resolution [Low-speed Feed
Mode]
When scanning at low resolution (lower than 400 dpi), you can set a slow speed for scanning documents regardless
of the resolution that is set. This setting is effective for scanning long page documents.
1 Start up the Software Operation Panel.
Refer to Starting Up the Software Operation Panel (page 193).
2 From the list on the left, select [Device Setting 2] → [Low-speed Feed Mode].
3 Select whether to enable or disable [Low-speed Feed Mode].
HINT
This setting can also be configured from the operator panel.
Operational Settings
248
To Next Page
Loading...
