Checking the Information
1 Press the power button on the front of the scanner.
[Ready] is displayed on the LCD.
2 Press the [Menu] button.
[Main Menu] is displayed on the LCD.
3 Press the [ ] or [ ] button and select [Information], then press the [Function/Enter] button to
confirm.
[Information] is displayed on the LCD.
ATTENTION
[Information] can be selected only when there is a message for replacing consumables/cleaning/replacing
maintenance parts/regular maintenance.
4 Press the [ ] or [ ] button to check the contents of the information.
You can check the messages for replacing consumables/cleaning/replacing maintenance parts/regular
maintenance.
How to Use the Operator Panel
87
To Next Page
Loading...
