When the message prompts replacing consumables/maintenance parts or cleaning, the corresponding
counter that requires consumable replacement/maintenance part replacement/cleaning is highlighted.
Counters will appear highlighted when:
● The page count after replacing the consumable reaches 95% of the value configured in Specifying the Cycle
to Replace Consumables [Life Counter Alarm Setting] (page 222) in the Software Operation Panel. (For
brake roller/pick roller/separator roller counters)
● The scanner determines that the condition of the roller has exceeded the threshold that can be corrected,
by monitoring the wear on the roller. (For assist roller counter)
● The page count after cleaning reaches 100% of the value configured in Scanner Cleaning Cycle [Cleaning
Cycle] (page 221) in the Software Operation Panel. (Cleaning counter)
● The amount of remaining ink reaches below 33%. This is only displayed when the imprinter is installed.
(For [Ink Level:Front] / [Ink Level:Back])
5 Take measures according to the contents of [Information].
Follow the instructions in the message if it prompts consumable replacement/cleaning/maintenance part
replacement.
For information on how to replace consumables, refer to the following:
● Replacing the Pick Roller (page 139)
● Replacing the Separator Roller (page 142)
● Replacing the Brake Roller (page 147)
● Replacing the Print Cartridge (page 152)
For details about cleaning, refer to Daily Care (page 115).
Maintenance parts (assist roller) require a service engineer to perform replacement.
For details, contact a service engineer. Refer to the contact information in the Contact List or the Contact for
Inquiries section in Safety Precautions bundled with this product and make an inquiry.
If the message prompts regular maintenance, please have the scanner checked by a service engineer for
regular maintenance/inspection.
For details, contact a service engineer. Refer to the contact information in the Contact List or the Contact for
Inquiries section in Safety Precautions bundled with this product and make an inquiry.
How to Use the Operator Panel
88
To Next Page
Loading...
