Parts and Functions
This section shows the names of the scanner parts.
● Front
No. Name Function
1 Stacker Stacks up the ejected documents. It can be kept at an
optimum height to straighten the documents.
2 Stacker side guide Aligns the documents in width direction as they are ejected
onto the stacker.
3 Stacker extension Pull out and adjust to the length of the documents.
4 Paper stop Guides the ejected documents in the length direction to
prevent them from being scattered. Though documents
can be aligned without the paper stop, it can be used to
stack them more neatly.
5 Hopper side guide Guides the documents in the width direction as they are
fed into the scanner.
Scanner Overview
15
To Next Page
Loading...
