57
- Memory Upgrade Module
Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to
check that your notebook has recognized the change.
To check the memory capacity, from the Modern Start screen press [Windows]+[X]. Select Control Panel from the
menu, then select Power Options. The amount of memory is displayed next to “Installed memory (RAM):”
There may be a variation between the actual memory size and what is displayed. This is possible if your system is
configured with an integrated Intel Graphics Media Accelerator which dynamically allocates system memory to
accelerate graphics performance.
Figure 30. Installing memory module Figure 31. Removing memory module
IF THE TOTAL MEMORY DISPLAYED IS INCORRECT, CHECK THAT YOUR MEMORY UPGRADE MODULE IS PROPERLY INSTALLED. (IF THE MODULE IS
PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT CORRECTLY RECOGNIZED, SEE TROUBLESHOOTING ON PAGE 58
.
Alignment Keys
Retaining Clips
Retaining Clip
Retaining Clip
To Next Page
Loading...
