Here you can choose your network type is
PPPoE or static IP or dynamic IP.
- Dynamic IP: Automatic connection, such as if
you connect the RT500 to the LAN port of any
Router, or some modems that have been
automatically connected. Normally, the previous
automatic connection step should be direct
available.
- PPPoE: If your Internet provider provides user
name and password to allow you to dial up to
access the Internet, select PPPoE.
- Static IP: If your network environment needs
to input your own WAN IP, Mask, Default
gateway, DNS and other data.
Above can choose your network type (see next
picture)
- Static IP: If your network environment needs
to input your own WAN IP, Mask, Default
gateway, DNS and other data.
Press Next []
To Next Page
Loading...