Fujitsu MESSHU RT500 - Specification; Q1: Chipset Specification; Q2: Explanation of the Light

6
Specification
Q1: Chipset specification
Wi-Fi speed
AC1200(300 + 867Mbps)
CPU
Qualcomm QCA9557 2x2 11abgn WiFi SoC
Switch/Ethernet
AR8033-AL1A + AR8035-A Gigabit Ethernet PHY
RAM
128 MB (Nanya NT5TU64M16HG-AC)
Flash
32 MB (Spansion S25FL256SAIFR0)
2.4 GHz Radio
- In QCA9557
- Unidentified 2.4 GHz power amp (x2)
5 GHz Radio
- QCA9882 2x2 abgn+ac radio SoC
- Unidentified 5 GHz power amp (x2)
Bluetooth
TI CC2564B dual-mode Bluetooth 4.1 controller
Antenna
4 /per router
Wifi security
WPA2/AES
Wi-Fi Standards
802.11 a/b/g/n/ac
Size
127x47.2mm /per router
Q2: Explanation of the light
A: You can click the ○
i
icon in APP for reference
Continuous light
Fast flash (0.5 seconds on ,
0.5 seconds off )
Slow flash ( One second
light , one second off )
White
system (mesh and Internet
connection) is working
properly.
App connects to the master
node for doing setup.
device is booting or System
function loading
Red
lost mesh connection for
slave devices.
No Internet.
Blue
master and slave devices are
processing easy setup.
device is waiting for setup.
(it means device is in factory
default state.)
Orange
poor mesh connection.
(it means slave device is far
away from master device or
other slave nodes.)