Fulcrum RACING ZERO DB - Checking Tubeless System Tightness; 4 - Fitting the Wheel on the Frame; Front Wheel Mounting; Rear Wheel Mounting

• Starting from the valve, pull the tyre with your hands until it
comes out of the rim (Fig. 22). Continue around the whole wheel
circumference.
2221
23 24
25
• Carry out the same operations on the other side of the tyre
(Fig. 23 and 24).
Note
Completely remove one side of the tyre before going on to
the other side.
• Lift off the tyre (Fig. 25).
®
11
ENG