How to fix a Fulgor Milano Dishwasher that won't start?
If your Fulgor Milano dishwasher isn't starting, begin by checking if the power cable is securely plugged in. Then, inspect the circuit breaker in your house. Ensure the water inlet tap is open and that the dishwasher door is fully closed. Finally, confirm you've pressed the On/Off button to turn the machine on.
General| Style | built-in dishwashers |
|---|---|
| Color | stainless steel |
| Load Capacity | 16 |
| Number of Cycles | 6 |
| Cycle Selections | pots and pans+, mixwash+, regular wash, daily wash, quick wash, rinse & hold |
| Options/Settings | pots and pans, mixwash, reg wash, daily wash, quick wash, rinces & hold |
| Drying Type | condenser drying |
| Noise level | 45 decibels adjusted |
| Control Type | touchpad |
| Delay Start | yes |
| Number of Racks | 3 |
| Cycle Signal | yes |
| Water Filter | yes |
| Sanitize Settings | no |
| Annual Energy Consumption | 225 kilowatt hours |
| Water Consumption Per Cycle | 3.5 gallons |
| Voltage | 120 volts |
| Current | 12 amperes |
Weight and Dimensions| Depth | 22 1/2 inches |
|---|---|
| Height | 33 7/8 inches |
| Width | 23 9/16 inches |
| Net Weight | 154 pounds |
To Next Page
