To Next PageTo Next Page
Need help?Do you have a question about the Full Boar FBT-8800 and is the answer not in the manual?
Maintaining a safe and clear workspace, and keeping unauthorized persons away.
Ensuring safe electrical connections and avoiding hazards like water and damaged cords.
Staying alert, using appropriate personal protective equipment (PPE), and preventing accidental starts.
Guidelines for proper application, maintenance, and safe storage of power tools.
Instructions on professional servicing and replacement of damaged parts for continued safety.
Warning against direct eye exposure to laser radiation and identifying the laser class.
Emphasizes the hazard of staring into the laser beam and the importance of following safety rules.
Detailed steps for assembling the base frame, legs, and trough of the machine.
Guidance on using the main power switch to turn the machine on and off.
Step-by-step guide on how to set up and execute a straight cut on tiles.
Procedure for setting up and executing cuts at a 45-degree angle.
Steps for performing lengthwise cuts by adjusting the guide rail angle.
How to preset the cutting distance for partial tile cuts using adjustment knobs.
How to switch the laser on/off, adjust its position, and use it as a cutting guide.
Instructions for detaching the laser and using it as a standalone laser level.
Step-by-step guide on safely removing and installing a new cutting disc.
Instructions for accessing and replacing the batteries in the laser unit.
Recommendations for cleaning the equipment, including safety devices and housing.
Routine maintenance tasks such as lubricating parts and replacing trough water.
Specific instruction to dismantle the laser before cleaning the machine with water.
Procedures for safely draining water and securing the machine for transport.
Conditions under which the product warranty will be considered void.
General