Need help?Do you have a question about the Full Spectrum Laser Pro Series and is the answer not in the manual?
Provides essential safety protocols and procedures for operating the laser cutter.
Details safety guidelines specific to laser operation, including enclosure and beam hazards.
Outlines fire hazards associated with laser cutting and engraving, and prevention measures.
Covers precautions related to the laser cutter's electrical components, power supply, and wiring.
Lists and illustrates the parts and accessories included in the laser cutter's toolbox.
Details the various parts and accessories that come with the laser cutter.
Presents optional upgrades and recommended accessories for enhancing the laser cutter's capabilities.
Provides step-by-step instructions for safely uncrating and inspecting the laser cutter.
Outlines the sequence of steps for assembling the laser cutter's operating systems.
Details the process of removing zip ties securing the drive belts before initial operation.
Explains how to connect the exhaust system to remove smoke and fumes from the machine.
Provides maintenance guidelines for pre-filters, HEPA, and activated carbon filters in fume extractors.
Guides the user through the critical steps of installing the laser tube into its mount.
Details the process of filling and connecting the water chiller to regulate laser tube temperature.
Explains how to connect the air compressor, which provides pressurized gas for cutting.
Guides users on connecting the laser cutter to a power source and understanding power controls.
Instructs on connecting the laser cutter to a computer using an Ethernet cable for software communication.
Details the process of downloading and installing the RetinaEngrave software for laser operation.
Introduces the essential tests and adjustments required for proper laser cutter operation.
Explains how to perform a test fire to check mirror alignment and identify any necessary adjustments.
Details the step-by-step process for aligning the laser mirrors using the red beam indicator.
Guides the user through aligning the focus lens for optimal laser beam precision.
Describes how to use the included acrylic ruler to achieve proper focus for the laser beam.
Introduces the LCD touch panel used for controlling basic laser cutter functions.
Explains the functions of various buttons on the laser cutter's control panel.
Describes the nine different operating modes accessible through the touchscreen interface.
Details the operation of the four arrow keys used for moving the laser head and navigating menus.
Guides new customers through the process of activating the laser cutter's control card online.
Provides steps for validating the control card when an internet connection is not available.
Introduces the RetinaEngrave software and its primary interface features.
Explains the functions of the 'File' and 'Laser' menus in the RetinaEngrave software.
Describes the 'Tabs' and right-side menus, including 'Current Position' and 'Move To' functions.
Details menu options like 'Open File', 'Save Project', and 'Zoom' functions.
Covers 'Laser Head Position', 'Test Fire', and job control functions like 'Start Job'.
Explains how to select different operational modes like Raster and Vector within the software.
Details how vector layers control cutting order, speed, and power for different colors.
Explains engraving as etching or marking a workpiece, differentiating it from cutting.
Details the Raster Engrave tab and its options for image processing.
Covers image functions like rotation, mirroring, inversion, and scaling for raster engraving.
Explains how to set raster power, speed, and black/white threshold for engraving.
Discusses DPI settings and their impact on engraving quality and performance.
Provides tips and best practices for achieving better results in raster engraving.
Explains vector cutting and recommended software for creating vector files.
Details the Vector Cut tab and its functionalities for cutting vector paths.
Covers vector manipulation functions like rotation, mirroring, resizing, and hatching.
Explains vector layer properties, speed, power, and repetitions for cutting.
Describes options for importing vector files, including ignoring raster or thin vectors.
Explains how to assign colors to objects for vector cutting and the use of layers.
Introduces the Design Tab for creating simple designs within the software.
Details the drawing tools available in the Design View, such as Open, Save, and New Line.
Covers grid options, zoom buttons, and bounding box settings in the Design View.
Explains how to render drawings and set drawing properties like size.
Details stroke, brush, and fill properties for shapes in the design workspace.
Introduces the importance of care and maintenance for optimal machine performance.
Provides instructions for installing or replacing the drive belts on the laser system.
Outlines recommended maintenance tasks on a daily, weekly, monthly, and quarterly basis.
Addresses common problems like the front panel not turning on or the laser not firing.
Covers issues like laser head crashes, diffused lines, and red diode laser problems.
Addresses PC connection issues and problems with vector cut line straightness.
Guides the user through the physical connection and setup of the rotary attachment.
Explains how to align the rotary attachment with the laser head for accurate engraving.
A step-by-step checklist for preparing and running a job on the laser cutter.
Describes different focus lenses and their suitability for various cutting and engraving tasks.
Outlines the warranty terms, coverage, and transfer policy for the laser cutter.
General| Model | Pro Series |
|---|---|
| Resolution | 1000 DPI |
| Laser Type | CO2 |
| Software | RetinaEngrave |
| Connectivity | USB, Ethernet |
| Cooling System | Water Cooling |
| Maximum Material Thickness | Varies with material |
| Power Supply | 110V or 220V |
| Weight | Varies depending on model |
| Laser Power | 45W |
| Work Area | 48x36 inches (depending on model) |
To Next Page
