Need help?Do you have a question about the Fulltone Choralflange CF-1 and is the answer not in the manual?
Details on each control knob and switch: Mix, Delay Time, Depth, Rate, Chorus/Flange, Narrow/Wide.
Description of Input, Output 1 (Mono), and Output 2 (Stereo) jacks and their usage.
Information on using the DC Jack (9VDC, Negative Center) and battery operation.
Caution against touching internal trimmers, as they are factory set and tampering will cause damage.
Instructions for accessing the battery compartment and the Buffered/TrueBypass DIP switch.
Explanation of True Bypass (mono only) and Buffered Output modes for mono/stereo operation.
Instructions for achieving a vintage-style chorus sound with specific knob and switch settings.
Guide to creating a subtler chorus tone by adjusting Mix, Depth, and Delay Time controls.
Achieving a fattening, doubling effect with slow rate and narrow bandwidth for use with distortion.
Achieving heavy flanging with slow/medium rate, high depth/mix, and optional volume adjustment.
Simulating Leslie speaker sounds with low Mix/Depth, and adjusting Volume Adj. and Rate.
General| Type | Chorus/Flanger |
|---|---|
| Technology | Analog |
| Power Supply | 9V DC (negative center) |
| Input Impedance | 1M Ohm |
| Output Impedance | 10K Ohm |
| True Bypass | Yes |
To Next Page
