FULTON ModSync SE User Manual

Questions? Please Contact Your Local Manufacturer’s Representative
2-3
SECTION 2 ModSyncSE-User-Manual-211020 INSTALLATION
! WARNING
This manual is provided as a
guide to the correct operation and
maintenance of your equipment,
and should be read in its entirety and
be made permanently available to
the sta responsible for equipment
operation. It should not, however
be considered as a complete code
of practice, nor should it replace
existing codes or standards which
may be applicable. Fulton reserves
the right to change any part of
this installation, operation and
maintenance manual without notice.
Do not install, operate, service,
or repair any component of this
equipment unless you are qualied
and fully understand all requirements
and procedures.
All information in this manual is for
reference and guidance purposes,
and does not substitute for required
professional training, conduct,
and strict adherence to applicable
jurisdictional /professional codes or
regulations
Wiring
The physical inputs and outputs of the ModSync® SE are able to be customized
by the user. Descriptions of the selections available are below.
 Digital Inputs
Dry contacts through the use of control relays should be provided for all digital
inputs. All digital inputs use the controls 24DC+ for the source voltage.

FULTON ModSync SE Specifications

General

Brand	FULTON
Model	ModSync SE
Category	Controller
Language	English