FULTON ModSync SE - Page 75

Questions? Please Contact Your Local Manufacturer’s Representative
SECTION 6 ModSyncSE-User-Manual-211020 WARRANTY & PARTS
6-5
Questions? Call (315) 298-8510, or visit us online at www.fulton.com
70
Sensor Configuration
-If- Running Transition is Enabled
Supply Sensor Mode
Transition Delay
Supply Sensor Sampling
Delay (MM:SS)
Supply Sensor Bias
Deviation:
-If- Outdoor Sensor is Enabled
-If- Warm Standby is Enabled
Outdoor Sensor Mode
Warm Standby:
Outdoor Sensor Sampling
Run for (MM:SS)
Outdoor Sensor Bias
Interval (HH:MM)
-If- Return Sensor is Enabled
Boiler 1 Configuration
Return Sensor Mode
Interface
Return Sensor Sampling
Hours
Return Sensor Bias
Cycles
-If- Supply Pressure Sensor is Enabled
Boiler 2 Configuration
Supply Pressure Mode
Interface
Supply Pressure Sampling
Hours
Supply Pressure High Range
Cycles
Supply Pressure Bias
Boiler 3 Configuration
-If- Return Pressure Sensor is Enabled
Interface
Return Pressure Mode
Hours
Return Pressure Sampling
Cycles
Return Pressure High Range
Boiler 4 Configuration
Return Pressure Bias
Interface
-If- Differential Pressure Sensor is Enabled
Hours
Differential Pressure Mode
Cycles
Pressure Sampling
Boiler 5 Configuration
Pressure Low Range
Interface
Pressure High Range
Hours
Differential Pressure Bias
Cycles
Optional Features
Boiler 6 Configuration
Outdoor Reset
Interface
Warming Features
Hours
Return Sensor
Cycles
Isolation Valves
Boiler 7 Configuration
Boiler Pumps
Interface
VFD Boiler Pumps
Hours
Valve/Pump Interlock
Cycles
System Pumps
Boiler 8 Configuration
VFD System Pumps
Interface
# of VFD System Pumps
Hours
VFD System Pump Control
Cycles
System Pump Sensor