10
EN
Taking curves
You can steer the skateboard by shifting your weight as already written. You
can adjust the ease of steering by using the king pin screw under the front
of the board. Be careful not to overtighten the king pin lock nut. To make the
curves steeper you have to bend deeper and shift the weight further.
INSTRUCTIONS FOR MAINTENANCE AND
SERVICE
• Your skateboard requires routine inspection and maintenance. Routinely
check the body of the skateboard and tyres for damage or excessive wear
before and after use. When noticing cracks and any sharp edges created,
do not ride the skateboard, and replace the deck by a new one.
• Clean the product only with a cloth or damp cloth and do not use any
special cleaning agent!
• Replace rollers and bearings as soon as you notice wear. To change the
wheels, loosen the axle nuts, remove the wheel and press the bearings off
the wheels with a suitable tool. To t the bearings, insert them into the
new rollers and put them back on the axle.
• Clean the bearings regularly using a soft, moist cloth and grease them
periodically.
• The variable steering control screw can be adjusted to increase or
decrease the front steering tension according to the weight of the user.
Use a socket wrench to do this properly.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Ltd
PO Box 1145
Oxford, OX1 9UW
United Kingdom
To Next Page
Loading...