FUNAI 22FL532/10 - Advanced Troubleshooting Scenarios; Picture and Sound Performance Troubleshooting; No Picture;Sound and Display Anomaly Troubleshooting

22
EN
Ghosts in picture
• Try a new channel, if OK, then possibly due to poor channel reception.
• Is antenna connected to terminal on the back of the unit?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
Picture blurred
• Try a new channel, if OK, then possibly due to poor channel reception.
• If outside antenna is being used, check for broken wire.
Sound OK, picture poor
• Try a new channel, if OK, then possibly due to poor channel reception.
• Is antenna connected to terminal on the back of the unit?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Adjust [Contrast] and [Brightness] control.
Picture OK, sound poor
• Try a new channel, if OK, then possibly due to poor channel reception.
• Check for local interference.
No picture or sound
• Try a new channel, if OK, then possibly due to poor channel reception.
• Is unit plugged in?
• Power at outlet?
• Is unit’s power on?
• Is antenna connected to terminal on the back of the unit?
• If outside antenna is being used, check for broken wire.
• Unplug the AC power cord and wait for about 1 minute, then plug the AC
power cord and turn on the unit again.
Different colour marks on TV screen
• Try a new channel, if OK, then possibly due to poor channel reception.
Black or luminous point on TV screen
• It is quality of the LCD Panel.