FUNAI LT7-M32BB User Manual

2
EN
PRECAUTIONS
POWER SUPPLY
The main power supply is engaged when the main plug is
plugged in a 220-240 V~, 50 Hz AC outlet. To operate the
unit, press [Q (standby-on)] to turn on the unit.
WARNING: LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
CAUTION
1) Do not attempt to open the cabinet. There are no user
serviceable parts inside. Refer all servicing to qualified
service personnel.
2) Slots and openings in the cabinet and the sides or
bottom are provided for ventilation. To ensure reliable
operation and to protect the unit from overheating, these
openings must not be blocked or covered.
Avoid installation in enclosed spaces such as bookcases
unless proper ventilation is provided.
3) Keep the unit away from radiators and other heat
sources.
4) Do not push objects of any kind into the unit through
the cabinet slots or openings as they could touch
electrically live parts or short circuit parts resulting in a
fire or electric shock.
5) To prevent fire or shock hazard, do not expose this unit
to dripping or splashing, no objects filled with liquids,
such as vases, should be placed on the unit.
6) Use the unit on a horizontal (flat) surface only.
7) Do not place any combustible objects on the unit
(candles, etc.).
8) The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by
broken glass pieces in case the LCD panel breaks.
The LCD panel is a very high technology product with
921,600 thin film transistors, giving you fine picture
details. Occasionally, a few non-active pixels may appear
on the TV screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of
your product.
9) Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
10) The mains plug shall remain readily operable.
11) Read the manual instructions to ensure correct and safe
installation and interconnection of the unit in
multimedia systems.
12) Keep a distance of 20 cm around the ventilation
openings of the unit.
13) Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the apparatus’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the apparatus.
Do not place the unit on the furniture that is capable of
being tilted by a child or an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or
even death.

FUNAI LT7-M32BB Specifications

General

Brand	FUNAI
Model	LT7-M32BB
Category	LCD TV
Language	English

Summary

Safety Precautions

Electrical Hazard Warnings

Warnings about fire and electric shock risks from moisture and internal parts.

General Safety Guidelines

Instructions on safe operation, ventilation, and avoiding damage.

Environmental and Disposal Information

Product Recycling and Battery Disposal

Guidelines for recycling products and disposing of batteries in EU member states.

Initial Setup Procedures

Stand Attachment and Mounting

Steps to attach the TV stand and secure the unit to a rack.

Controls and Operation

TV Panel and Remote Control Layout

Identifies buttons on the TV and remote for operation.

Rear Panel Connectivity

Description of Rear Terminals

Details all input and output ports located on the rear of the TV.

Preparation and External Connections

Battery Installation and HDMI/SCART Setup

How to install remote batteries and connect HDMI/SCART devices.

Additional External Connections

Component, Video, and S-Video Ports

Connecting external devices using Component, Video, and S-Video inputs.

PC Input and Cable Management

Connecting to a PC and Cable Organization

Connecting the TV as a PC monitor and managing cables.

Initial System Setup

Language and Country Configuration

Setting the menu language and country during initial setup.

Basic TV Operations

Channel, Volume, Sleep Timer, Input Switching

Performing essential operations like channel selection, volume control, sleep timer, and input changes.

Sound and Display Information

Audio Language/Mode and Screen Info

Selecting audio languages/modes and viewing TV screen information.

Electronic Programme Guide (EPG)

Using the EPG for Program Information

Navigating the EPG to find TV program schedules and details.

Screen Display Modes

Adjusting Aspect Ratios for Different Signals

Changing screen display modes for SD, HD, and PC inputs.

Picture Adjustment Settings

Picture Modes and Colour Temperature

Selecting picture presets and adjusting colour temperature.

Fine-Tuning Picture Elements

Adjusting brightness, contrast, colour, hue, and sharpness.

Advanced Picture Adjustments

Noise Reduction and Colour Enhancements

Configuring DNR, CTI, flesh tone, and luma control for picture quality.

Backlight and Other Advanced Settings

Adjusting backlight and other detailed picture parameters.

PC and Sound Configuration

PC Input Settings and Auto Adjustment

Adjusting PC screen position, clock, phase, and auto-adjusting.

Sound Modes and Virtual Surround

Selecting sound modes, adjusting bass, treble, and using virtual surround.

Audio and Country Settings

Auto Volume, Assistive Services, and Country

Configuring auto volume, accessibility features, and country settings.

Channel Tuning and Audio Options

Audio Language Selection and Auto Scan

Setting audio languages and performing automatic channel scanning.

Channel Scanning Procedures

Manual, Update, and RF Scans

Methods for scanning analogue and digital channels.

Channel List Navigation

How to view and navigate the list of available channels.

Channel Management Features

Channel Skip and Channel Sort

Skipping unwanted channels and reordering the channel list.

Channel Editing and Decoding

Modifying Channel Information

Editing channel number, name, frequency, and colour system.

Channel Decoding Setup

Activating decoders for channels requiring them.

TV System Configuration

Fine Tuning, Time Zone, Auto Shut Off, Menu Language

Adjusting fine tuning, time zone, auto shut off, and menu language.

Subtitle and Teletext Settings

Subtitle Options and Teletext Configuration

Setting up subtitle languages and teletext display options.

Advanced TV Functions

Common Interface, Parental Controls, Reset

Using CI modules, setting parental locks, and resetting settings.

Parental Controls and Software Updates

Maturity Rating, PIN Code, and Software Download

Setting maturity ratings, PIN codes, and managing software updates.

Maintenance and Troubleshooting

Cleaning, Servicing, and Issue Resolution

Guidelines for cleaning, servicing, and troubleshooting common TV problems.

Technical Specifications

General and Other Technical Data

Detailed specifications of the TV, including terminals, power, and dimensions.

Declaration of Conformity

Compliance with Regulations

Statement confirming the product adheres to specified directives and standards.