FUNAI LT7-M22BB - Page 7

7
EN
26. COMPONENT (Y/Pb/Pr) / AUDIO (L/R) input jack
Connect an RCA component video and an RCA audio
cable (not supplied) to the component video and audio
output jack of an external device.
27. S-VIDEO input jack
Connect an S-Video cable (not supplied) to the S-Video
output jack of an external device.
28. VIDEO input jack
Connect an RCA video cable (not supplied) to the video
output jack of an external device.
29. PC-IN AUDIO input jack
Connect a mini-plug audio cable (not supplied) to the audio
line out jack of a PC.
30. HEAD PHONE jack
Connect a headphone.
31. AUDIO (L/R) input jack
Connect an RCA audio cable (not supplied) to the audio
output jack of an external device.
32. SCART jack
Connect a scart cable (not supplied) to the scart jack of an
external device.
33. (Aerial) input jack
Connect an RF coaxial cable (not supplied) to an antenna or
RF output jack of a cable system.
34. PC-IN (RGB) input jack
Connect a VGA cable (not supplied) to the monitor jack of
a PC.
35. HDMI (HDMI 1 / HDMI 2) input jack
Connect an HDMI cable (not supplied) to the HDMI
output jack of an external device.
36. C.I. (Common Interface) slot
Common Interface (CI) Module: Insert the CI module.
37. AC power cord
Connect to a standard AC outlet to supply power to this
unit.
Note:
The AUDIO (L) jack is for monaural input. The
sound is heard from both speakers. Use this jack for
a monaural audio device.
Note:
*
service terminal (service use only)
• Use this terminal only when a software update is
necessary.
• User should not connect any devices to the service
terminal such as digital camera, keyboard, mouse,
etc. (because these will not work).
• The software update is, in most cases, handled by
an authorized service person or in some
circumstances the user may be asked to do the
software upgrade themselves.