Need help?Do you have a question about the FUNAI NC180 and is the answer not in the manual?
General| Type | Remote Control |
|---|---|
| Brand | FUNAI |
| Model | NC180 |
| Power Source | Battery |
| Number of Batteries | 2 |
| Compatible Devices | TV |
Turns the device on or off. Located at the top left of the remote.
Opens or closes the disc tray for inserting or removing discs.
Accesses the setup menu for device configuration.
Selects or activates the VCR function.
Rewinds the VHS tape.
Initiates the dubbing process from VHS to DVD.
Navigates back or cancels the current operation.
Selects or activates the DVD function.
Advances the VHS tape.
Stops the current playback or recording.
Turn on devices, open disc tray, insert blank DVD-R or DVD-RW disc.
Insert VHS tape, rewind or fast forward to the desired starting point.
Press VCR button, then D. Dubbing button to start recording process.
Stop recording, wait for disc writing, check space, and finalize disc for playback.
Use eject buttons to remove the finalized disc and VHS tape.
Turn off both the recorder and monitor using their respective power buttons.
To Next Page