Need help?Do you have a question about the Funke ATR833S and is the answer not in the manual?
General| Channel Spacing | 8.33 kHz / 25 kHz |
|---|---|
| Current Consumption (Transmit) | 1.5 A |
| Display | LCD |
| Channels | 760 |
| Modulation | AM |
| Current Consumption (max) | 1.5 A |
| Operating Temperature | -20°C to +55°C |
| Current Consumption (Receive) | 0.3 A |
| Audio Output Power | 4 W |
| Sensitivity | 2.0 µV |
| Frequency Range | 118.000 - 136.975 MHz |
Explains icons and acronyms used throughout the manual for clarity.
Provides contact details and procedures for repairs and support.
Lists key functionalities and specifications of the ATR833S transceiver.
Details the device's buttons, knobs, and their primary operations.
Covers manual input, recall from memory, and last used frequency lists.
Guides on adjusting volume, squelch, intercom, and display parameters.
Explains how to transmit, receive signals, and utilize dual watch functionality.
Configures frequency input for 8.33 kHz or 25 kHz channels.
Adjusts screen brightness and automatic display darkening for power saving.
Adjusts microphone sensitivity, type selection, and auto power-on behavior.
Instructions to reset the device to its original factory settings.
General tips, telecommunication data, and unpacking instructions.
Details on physical mounting, connector types, and basic wiring.
Describes cable types, connector pin allocation, and detailed wiring diagrams.
Recommendations for antenna type, placement, and SWR requirements.
Lists frequency ranges and corresponding channel spacing for operation.
Detailed electrical, mechanical, and performance data of the transceiver.
Details compliance with environmental standards and operating conditions.
To Next Page
