Troubleshooting
The chart below provides some of the common problems that occur with the operation of the
inflatable. In most cases a problem can easily be solved by a supervising adult.
Many times the problem that completely stops an inflatable from working is one of the many
simple things that are forgotten or overlooked. It can save several phone calls or a more expensive
repair, as well as valuable time to double check everything.
1. The inflatable serial number and model.
2. The owners manual.
3. All calls should be made by the same person to avoid confusion. Be sure to get the
name of the person to whom he/she is speaking to at FUNormous. All calls should
then be directed to that person.
4. Provide a phone number where you can be reached.
5. The maintenance log and repair record.
6. The person calling the factory must be familiar with the problem and be able to
describe the problems of the inflatable. (i.e.; Was the problem gradual? Are there
any noises occurring that are not normal? Was it a one time problem, or does it
occur regularly?)
Common
Problems
Possible Cause Solution
Inflatable
deflates or
loses pressure
Insufficient power supply
Check power outlet, circuit breakers or
generator.
Inflation tube connected to
blower
If kinked, entangled, or loose: adjust and
tighten.
Blower air intake blocked
Clear all debris from blower intake. Ensure
nothing is blocking blower air intake.
Blower device malfunction
Check blower manual for solution or possibly
replace.
Damage to inflatable
Remove all children and deflate inflatable.
Minor repairs can be done on location. Major
repairs must be performed by repair center.
Inflatable
moves from
setup location
Tethers have become loose Remove all children and adjust tethers.
Damaged anchor points,
tethers, stakes or sandbags
Remove all children. Repair or replace
damaged equipment.
If you are not able to solve a problem call FUNormous Customer Service at (877) 710-1777.
Be prepared with the following information:
13