To Next PageTo Next Page
Need help?Do you have a question about the Furman CN-3600SE and is the answer not in the manual?
Electrical Specifications| maximum AC current rating | 16 Amps, 220-240 VAC |
|---|---|
| spike clamping voltage | 376VAC peak @ 6, 000 Volts/3, 000 Amps |
| maximum surge current | 6, 500 Amps |
Power| power consumption (no load) | 10 Watts |
|---|---|
| AC cord specifications | 1.5 mm2 x 3, 2.5 m length |
| AC under-voltage protection | EVS, 175VAC+/-3VAC |
Operating Environment| operating temperature range | -5C (40F) to 40C (105F) |
|---|---|
| humidity range | <90% rH |
| response time | 1 nanosecond |
Explains Furman's history and expertise in AC power quality and protection.
Details the benefits of AC power sequencing for AV equipment protection.
Lists items included in the box for inspection before installation.
Describes Furman's SmartSequencing communication technology for linking sequencers.
Explains LiFT's function in reducing differential AC noise for cleaner power.
Details EVS protection against prolonged over-voltage conditions.
Explains SMP technology for protecting against extreme line voltage conditions.
Covers remote control capabilities and integration with BlueBOLT®.
Describes the function of the START SEQUENCE push button.
Highlights the UNSWITCHED OUTLET and CIRCUIT BREAKER functions.
Explains the 3-position ON/OFF Security Switch settings.
Details the Remote Barrier Strip, SmartSequencing Barrier Strip, and Relay Barrier Strip connections.
Highlights LED indicators, AC cord, and warranty information.
Lists essential safety guidelines to read and follow.
Explains the Primary/Secondary unit roles in a SmartSequencing chain.
Details how to link multiple sequencers to create a chain.
Highlights the fault tolerance and resilience of the SmartSequencing interface.
Explains how DIP switches and the DLY ADJ pot control delay times.
Details the FORCE OFF safety feature and its configuration via DIP 4.
Explains how DIP 5 and 6 control behavior when 12VDC or GND is applied to REM.
Defines the switching preference for remote control devices connected to the REM input.
Configures the CN-3600SE as either a Primary or Secondary sequencer.
Determines how the CN-3600SE recovers from an Extreme Voltage (EVS) error.
Explains the meaning of PRIMARY and SECONDARY LINK LED activity.
Explains the function of the DELAY 1, 2, and 3 indicator lights.
Describes the POWER, PROTECTION OK, and EXTREME VOLTAGE LED indicators.
Details the front panel 16A and rear panel 10A circuit breakers.
Details the 4-Pin Phoenix-Type barrier strip for remote control.
Explains how to link units using the SmartSequencing 4-Pin barrier strip.
Describes the 5-Pin Phoenix-Type barrier strip for FORCE OFF and DELAY 3.
Explains the function and wiring of the FORCE OFF terminals.
Details the behavior and limitations of the DELAY 3 terminals.
Guides on setting up a single CN-3600SE unit.
Explains configuring multiple CN-3600SE units for SmartSequencing.
Explains how circuit breakers protect against excessive current draw.
Addresses issues like dead unit, dead outlet banks, and tripping breakers.
Covers flashing LEDs, red link lights, and out-of-sync sequencers.
Addresses PROTECTION OK LED off and EVS LED illuminated issues.
Provides steps to re-sync sequencers in SmartSequencing or Legacy systems.
Specifies the maximum AC current the unit can handle.
Details the AC power cord type and length.
Lists the types and quantities of AC outlets provided.
Details the SMP and EVS protection parameters.
Describes the LIFT AC filtering capabilities.
Specifies the operational temperature limits for the unit.
Specifies the operational humidity limits for the unit.
Details various operational modes like GND, Momentary, Primary/Secondary, EVS Reset.
Describes the front panel potentiometer for fine-tuning delay.
Details Remote Terminal, SmartSequencing, FORCE OFF, and RS-232 interfaces.
Covers IP control options via BB-RS232 adapter for BlueBOLT®.
Details the accuracy and availability of the voltmeter feature.
Details the accuracy and availability of the ammeter feature.
Notes the presence and type of the four thermal circuit breakers.
Specifies the power draw when the unit is not under load.
Indicates that the unit complies with CE standards.
Details the 15-year limited warranty for defects in design, material, or workmanship.
Warns about warranty limitations for products purchased through unauthorized internet channels.
