Furman HA-6A User Manual

MODEL HA-6A
Owner’s Manual
Important Note: To obtain best results from this Furman Sound electronic
product, please be sure to read this manual carefully before, using, it,
Also, to be sure of obtaining full protection under the terms of the Limited
Warranty in case your ownership documents are lost, please fill out and
return the Warranty Registration Card immediately'. Please verify that the
serial number shown on the Warranty Card matches the serial number
on your unit.
I
HA -6A SPECIFICATIONS
OUTPUTS: Power:
Connectors:
INPUTS: Input Impedance: Sensitivity: Connectors:
GENERAL: Distortion:
Signal to Noise: Frequency Response Dynamic Headroom:
Power Requirement:
Mechanical:
20 watts per channel, stereo, into either 4 ohms or 8 ohms, 20 Hz to 20 KHz. Speak-s A: 5-way binding posts (accommodates
dual banana plug,,, spade lijgs, bare wires, etc.) Speakers B-Satellite/Remote: XLR.

Furman HA-6A Specifications

General

Brand	Furman
Model	HA-6A
Category	Amplifier
Language	English

Summary

HA-6A Specifications

Introduction

Features

Description

Options and Accessories

HA-6AB Option

Provides XLR connectors for balanced inputs and standard 1/4" phone jacks.

HR-2 Remote Station Accessory

Compact box for mic stand, provides headphone jacks and volume controls.

Uses of the HA-6A

Recording

Headphones for overdubbing and syncing new tracks with previously recorded ones.

Rehearsal

Headphones for musicians to control individual mixes and avoid disturbing others.

Language Labs

Driving many headphone sets, especially in language learning environments.

HR-2 Remote Stations

Expanding headphone capacity and placing volume controls at listening positions.

Descriptions of Controls

Front Panel

Explains input level, signal/overload lights, and headphone jacks/volume controls.

Rear Panel

Covers power switch, ground lift, speaker outputs, and input connectors.

Installation

Circuit Description

Limited Warranty

Service

Other Furman Products