Example 2: Mono Pedals, Two Amps
This example is similar to the rst except there are two amps. Both the Left/Mono and Right channels
are used, and receive identical signals to send to their respective amps. The feed to the Right channel is
split off from the Left/Mono signal path using the Left/Mono Rack Effects Send jack, because plugging in
to either of the Send jacks allows a “tap” to be taken without breaking the corresponding signal path.
Example 1: Mono Pedals, Single Amp
In this example, two pedals are linked together with a short cable going from the output of the rst to the
input of the second. Since there is only one amp, only the Left/Mono channel is used.
To Next Page
Loading...