What to do if my Furrion 2021123835 Speaker System has no sound?
If your Furrion Speaker System isn't producing any sound, try the following: * Ensure the Soundbar is powered on. * Verify that you've selected the correct audio input source. * Check that the volume isn't turned down to zero and that the audio isn't muted. * Inspect the audio connector for any damage.
How to connect a Bluetooth device to my Furrion Speaker System?
To connect a Bluetooth device to your Furrion SB 2.1 Speaker System, follow these steps: 1. Ensure Bluetooth is selected as the source mode. 2. Enable the Bluetooth function on your device. 3. Select 'Furrion SB 2.1' from the list of available Bluetooth devices. 4. If 'Furrion SB 2.1' isn't listed, disconnect Bluetooth on your device and relaunch pairing. 5. If the Soundbar is connected to another device, press and hold the button on the remote to disconnect it. 6. Make sure the Bluetooth device is within 10 meters of the Soundbar.
Why is my Furrion Speaker System remote control not working?
If your Furrion Speaker System remote control isn't working, try these solutions: * Check the remote's battery to ensure it's not dead. * Point the remote directly at the IR sensor on the device. * Make sure there are no obstacles blocking the path between the remote and the IR sensor.
Why is the Bluetooth audio quality poor on my Furrion 2021123835 Speaker System?
If you're experiencing poor audio quality from a Bluetooth device connected to your Furrion Speaker System, it might be due to poor Bluetooth reception. Try moving the device closer to the Soundbar or removing any obstacles between them.
General caution notes for safety.
Specific safety instructions to follow.
FCC Statement and compliance information.
Industry Canada compliance information.
Warnings and precautions regarding battery usage.
Guidelines for product disposal and environmental care.
Declaration of conformity for wireless operation.
Lists all included items in the product packaging.
Details on connecting the soundbar to a power source.
Instructions for battery installation and precautions for the remote.
Identifies and explains the controls and ports on the soundbar.
Explains the functions of each button on the remote control.
Illustrates how to connect the soundbar to a TV.
Illustrates how to connect other audio devices.
Instructions for managing cables for a secure connection.
Steps to mount the soundbar directly onto a compatible TV.
Steps to mount the soundbar onto a wall.
Explains basic functions like power, mute, volume, and source selection.
Details on connecting, pairing, unpairing, and controlling Bluetooth playback.
Solutions for distorted audio issues.
Solutions for when there is no audio output.
Solutions for Bluetooth connection problems.
Solutions for low audio quality during Bluetooth playback.
Solutions for issues with the remote control not functioning.
General| Power supply | 100-240VAC 1.5A 60Hz |
|---|---|
| Total power | (2 x 20W + 2 x 15W) RMS |
| Input terminals | Stereo RCA Input (x 1) 3.5mm Aux Input (x 1) Coax Input (x 1): Support and comply with PCM format. |
| Frequency response | 40Hz-18KHz |
| S/N ratio (Audio 1KHz 0dB) | 65dB |
| Bluetooth Version | V4.2 (A2DP/AVRCP) |
| Bluetooth Name | Furrion SB 2.1 |
Weight and Dimensions| Dimension (W x H x D) | 39 7/16” x 3 1/2” x 3 1/2” (10008888mm) |
|---|
To Next Page