To Next PageTo Next PageHow to troubleshoot Furrion Aurora that does not operate?
If your Furrion TV isn't operating, ensure it's properly plugged into a working AC outlet. Check the fuse or circuit breaker to confirm power is available. As a last resort, try unplugging the unit for an hour before plugging it back in.
Why is my Furrion Aurora TV showing black and white image?
If you're seeing a black and white image from a connected AV device on your Furrion TV, check the video connections on both the TV and the device. Ensure the colors match between the connectors and sockets: green (Y), blue (Pb/Cb), and red (Pr/Cr) for component connections, and yellow (VIDEO) for composite connections. Also, make sure all video cables are firmly connected.
What causes poor picture on Furrion TV?
If you are experiencing poor picture or no picture on your Furrion TV, try tuning to another station to rule out issues with the current broadcast or cable signal. Ensure that channels are properly set into memory. Check the connections of your antenna or cable TV and adjust the antenna if necessary. Also, check for any potential sources of interference and review your picture control adjustments.
Why does my Furrion TV have poor sound?
If you're getting poor sound or no sound from your Furrion TV, first try tuning to another station to rule out problems with the current broadcast or cable signal. Check your sound adjustments, such as volume and mute settings. Also, look for any potential sources of interference that might be affecting the audio.
How to improve Furrion TV reception?
If you are experiencing poor TV reception on your Furrion TV, make sure the antenna amplifier is turned on if you're using Antenna TV. You may need to adjust the antenna position to find a stronger signal. Check that the antenna connection is securely attached to the TV. Also, verify that power is supplied to the antenna distribution box and that your incoming cable is connected to the correct cable/antenna wall connection inside your RV. Finally, ensure the internal RV coax jump cable is connected to the correct port.
What to do if my Furrion Aurora has picture but no sound?
If your Furrion TV has a normal picture but no sound, first check the volume settings and make sure the sound isn't muted by pressing the MUTE button. Try switching to another channel to rule out a broadcast issue. Also, verify the audio cable connections are secure.
Why is my Furrion TV remote control not working?
If your Furrion TV remote control isn't working, ensure it's within range and there are no obstructions blocking the signal. Check the batteries to make sure they have power. Also, verify that the remote is set to the correct operating mode (TV, VCR, etc.).
How to fix poor cable reception on Furrion Aurora TV?
If you are experiencing poor Cable / Satellite TV reception on your Furrion TV, ensure the antenna amp is turned off for cable signal. Check if the incoming cable is connected correctly to RV. Ensure cable splitter box has power. Check if the incoming cable is connected to the correct cable / Satellite wall connection inside your RV. Ensure the internal RV coax jump cable is connected to the correct port. Ensure Dish has no obstruction.
Why does my Furrion Aurora keep shutting off?
If your Furrion TV shuts off unexpectedly, check if the Sleep Timer is enabled. Also, consider whether there might have been a power interruption.
General| Display Type | LED |
|---|---|
| Smart TV | Yes |
| Outdoor Use | Yes |
| Operating Temperature | -4°F to 122°F (-20°C to 50°C) |
| Refresh Rate | 60Hz |
| HDMI Ports | 3 |
| Ethernet | Yes |
| Screen Size | 43 inches, 55 inches, 65 inches |
| Resolution | 4K Ultra HD (3840 x 2160) |
| HDR Support | HDR10 |
| Weatherproof | Yes |
| Inputs | HDMI, USB, RF |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Speaker Output | 20W (2 x 10W) |
| Dimensions (W x H x D) | Varies by model |
| Weight | Varies by model |
