What to do if my Furrion LED TV does not operate?
If your Furrion LED TV isn't working, ensure the power cord is properly plugged in and try a different AC outlet. Also, check the fuse or circuit breaker. As a last resort, unplug the unit for an hour, then plug it back in.
Why Furrion LED TV has normal picture, but no sound?
If your Furrion LED TV shows a picture but has no sound, first check the volume settings and make sure the sound isn't muted by pressing the MUTE button. If that doesn't work, try changing the channel and inspect the audio cable connections.
What to do if Furrion LED TV has poor sound or no sound?
If your Furrion LED TV has poor or no sound, try tuning to another station, as the current station or cable TV provider might be experiencing issues. Also, check the volume and mute settings. Finally, check for any potential sources of interference.
Why is my Furrion LED TV remote control not working?
If the remote control for your Furrion LED TV isn't working, first ensure it's within range and there are no obstructions. Then, check the batteries. Finally, make sure the correct operating mode (TV, VCR, etc.) is selected on the remote.
What to do if Furrion LED TV has poor picture or no picture?
If your Furrion LED TV displays a poor picture or no picture, try tuning to another station, as the current station or cable TV provider may be experiencing issues. Also, ensure channels are properly set into memory. Check the antenna or Cable TV connections and adjust the antenna. Look for potential sources of interference and check the picture control adjustments.
How to fix poor TV reception on Furrion LED TV?
To improve poor TV reception on your Furrion LED TV: * Ensure the antenna amplifier is turned on for Antenna TV. * Adjust the antenna position for a stronger signal. * Check the tightness of the Antenna connection to the TV. * Verify power is supplied to the Antenna distribution box. * Confirm your incoming cable is connected to the correct cable/antenna wall connection inside the RV. * Ensure the internal RV coax jump cable is connected to the correct port.
How to improve poor Cable / Satellite TV Reception on Furrion LED TV?
To improve poor Cable / Satellite TV reception on your Furrion LED TV: * Ensure the antenna amp is turned off for cable signal. * Check the incoming Cable is connected correctly to RV. * Ensure cable splitter box has power. * Confirm the incoming cable is connected to the correct cable / Satellite wall connection inside your RV. * Ensure the internal RV coax jump cable is connected to the correct port. * Check Dish has not obstruction.
Why does my Furrion LED TV shuts off by itself?
If your Furrion LED TV shuts off unexpectedly, it might be due to the Sleep Timer being set. Also, check for any recent power interruptions.
Why Furrion LED TV AV input plays black and white?
If the AV input on your Furrion LED TV is displaying in black and white, check the RCA connections on the back of the TV and the source to ensure they are correctly connected. Also, verify that the yellow connection is in the correct port.
General| Resolution | 1366 x 768 |
|---|---|
| Aspect Ratio | 16:9 |
| Contrast Ratio | 1000:1 |
| USB Ports | 1 |
| Weight | 3.3 kg |
| Refresh Rate | 60Hz |
| Backlight | LED |
| Power Consumption | 30W |
| Screen Size | 19 inches |
| Display Type | LCD |
| Inputs/Outputs | HDMI, USB |
To Next Page
