EasyManua.ls Logo

Furrion FOS43TADS - User Manual

Furrion FOS43TADS
26 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
4.3” Vision S Camera System
Système de caméra Vision S de 4.3po
Sistema de cámara Vision S de 4.3”
Instruction Manual
Manuel d’instructions
Manual de instrucciones
Models: FOS43TADS/FOS43TASR
FOS43TASE/FO
S43TASF
* The packing contents may be different based on the kit you purchased.
Please take the actual product as standard.
* Le contenu de l’emballage peut être différent en fonction de la trousse
achetée. Veuillez prendre le produit réel en référence.
* Es posible que los contenidos del embalaje sean diferentes según el kit
que haya comprado. Tome el producto real como estándar.

Table of Contents

Questions and Answers

  • S
    Shannon DavisAug 9, 2025
    What to do if Furrion Automobile Accessories signal is weak?
    • A
      Angela CarrilloAug 9, 2025
      If you are experiencing a weak signal with your Furrion Automobile Accessories, here are a few things to check: * Make sure the camera antenna is properly fitted and secured vertically. * Reduce the distance between the camera and monitor. * Remove any large, dense objects that might be blocking the signal. * Turn off any nearby electrical appliances that could be causing interference. * Be aware that overhead power lines may also interfere with the signal. * Try unpairing and pairing the devices again.
  • A
    Ashley RodriguezAug 15, 2025
    How to fix Furrion FOS43TADS monitor if it won’t turn on?
    • U
      ubrooksAug 15, 2025
      If your Furrion Automobile Accessories monitor isn't turning on (no blue LED), try the following: 1. Ensure the power cable is properly connected. 2. Verify the cigarette lighter provides a 12-24V DC output. 3. Check the fuse in the cigarette socket adapter.
  • G
    Gregory HarrisAug 21, 2025
    What to do if Furrion FOS43TADS Automobile Accessories camera and monitor won’t pair?
    • C
      Carrie RiveraAug 22, 2025
      If your Furrion Automobile Accessories camera and monitor are not pairing, verify that the camera is receiving power. Also, ensure you hold the camera pairing button for 2 seconds.
  • S
    Scott BoydAug 27, 2025
    Why Furrion Automobile Accessories monitor blue LED is not lit and there is no picture?
    • B
      brandilunaAug 27, 2025
      If your Furrion Automobile Accessories monitor's blue LED is not lit and there is no picture, it could be due to the camera not receiving power. Make sure the tow vehicle is running, the 7-way connector is connected, and the circuit the camera is connected to has power.
  • D
    Dawn RiceSep 2, 2025
    How to improve night vision on Furrion Automobile Accessories camera?
    • B
      Briana DiazSep 2, 2025
      If the night vision on your Furrion Automobile Accessories camera is poor or not functioning, the light sensor on the camera may be dirty or obstructed. Ensure the camera unit is installed at least 2 inches away from rear lights.

Summary

Important Safety Instructions

Electrical Safety

Discusses risks associated with 12V DC systems and electrical shock during installation.

Cautionary Notes

Advises against disassembling or repairing the system, and notes the absence of internal fuses.

Installation Safety Precautions

Highlights the need for specialist skills and using only supplied or recommended parts for safe installation.

RF Exposure Guidelines

Ensures compliance with RF exposure limits by maintaining a minimum distance of 20cm between equipment and body.

Installation Guide

Monitor Installation

Provides steps for mounting the monitor on the windshield using a suction cup, ensuring safe placement.

Camera Installation Basics

Details considerations for camera mounting position and preparation for a watertight installation.

Camera Location and Testing

Guidance on optimal camera placement, testing signal strength before permanent mounting.

Sharkfin Camera Installation

Doorway Camera Installation

Electrical Connections

Connecting the Monitor

Connecting the Camera

Safety warnings for wiring, ensuring correct polarity, and waterproof connections.

Connecting the Traffic Light

Getting Started

Activate the Monitor

Pairing the Camera and Monitor

Step-by-step guide to pair the camera and monitor wirelessly for initial setup.

Pairing Status Indicators

Change Settings

Camera Settings Menu

Mirror and Rotation Settings

LCD Auto Off and Motion Detect

Picture Adjustment

Operation Guide

System Operation

Describes how the system works when the vehicle is shifted into reverse and monitor activation.

Monitor Button Functions

Product Specifications

Troubleshooting Guide

Monitor and Pairing Issues

Solutions for monitor power problems, pairing failures, and weak signal icons.

Night Vision and Picture Problems

Troubleshooting for poor night vision, no picture, and camera not functioning.

Furrion FOS43TADS Specifications

General IconGeneral
Screen Size4.3 inches
Display TypeLCD
Monitor Size4.3 inches
Aspect Ratio16:9
Contrast Ratio500:1
Input Voltage12V DC
Built-in SpeakersYes
HDMI InputsNo
USB PortNo
Remote ControlYes
Resolution480 x 272 pixels
Product TypeObservation System
Brightness400 cd/m2
Weight0.4 lbs

Related product manuals