Need help?Do you have a question about the Furuno FAP-55 and is the answer not in the manual?
Specific conditions where AUTO/NAV modes should be avoided for safety.
Important operational precautions for using AUTO/NAV modes safely.
Instructions for powering on the FAP-55 unit and initial status.
How to select the appropriate sea state setting for optimal performance.
Steps to set and follow a course to a destination using AUTO mode.
How to maneuver around obstacles while using the autopilot.
Instructions for safely shutting down the autopilot system.
Guide on utilizing the navigation mode for course plotting.
Setting rudder limits and connecting the remote controller.
How to select the appropriate sea state setting for optimal performance.
Example scenario demonstrating AUTO mode operation.
Example scenario showing combined AUTO and NAV mode usage.
Explanation of the watch alarm function and its notifications.
General warnings and precautions for system operation.
Pre-sailing checks to ensure proper autopilot functionality.
Procedure for the automatic self-check upon system power-on.
Detailed steps for executing the system's self-check program.
Guidelines and procedures for installing the autopilot components.
Pre-sailing checks to ensure proper autopilot functionality.
Initial configuration of steering parameters for optimal boat control.
General| Type | Autopilot System |
|---|---|
| Model | FAP-55 |
| Control Method | Digital |
| Operating Temperature | -15°C to +55°C |
| Vibration | IEC 60945 |
| Shock | IEC 60945 |
| Display | LCD |
| Interface | NMEA 0183 |
| Course Detection | Magnetic compass or GPS input |
| Power Supply | 12/24 VDC |
| Storage Temperature | -20°C to +70°C |
| Steering Modes | Auto |
| Weight | Control Unit: Approx. 0.8 kg |
| Humidity | 95% RH or less at 40°C |
To Next Page
