Furuno FAX-410 Operator's Guide

1
FACSIMILE RECEIVER FAX-410
Operator’s Guide
The purpose of this Operator’s Guide is to provide the basic operating procedures for this
equipment. For more detailed information see the Operator’s Manual.
Control Description Control Description
POWER Turn power on or off. IOC Choose IOC (Index of Coopera-
tion).
VOLUME Adjust volume of receive signal. RCD Start and stop recording.
SYNC Fine tune the phasing signal. C • Clear data in setting mode.
• Switch from setting mode to
standby mode.
PRG • Enable a setting mode (in com-
bination with numeric key).
• Return to previous screen in a
setting mode.
E Confirm setting.
FRQ • Change from channel mode to
frequency mode.
• Set frequency in frequency
mode.
2 Raise channel in channel mode,
or raise frequency in frequency
mode.
DIM Adjust backlight of LCD, in four
levels.
4 Manual phasing (leftward) in
recording. Each press shifts the
recording leftward by 2.5% of the
paper width.
CH • Change from frequency mode
to channel mode.
• Set channel in channel mode.
5 Display date and time.
SPD Choose recording speed. 6 Manual phasing (rightward) in
recording. Each press shifts the
recording rightward by 2.5% of
the paper width.
REV • Reverse recording format
(from black on white to white
on black and vice versa).
• Enter decimal point in fre-
quency.
8 Lower channel in channel mode,
or lower frequency in frequency
mode.
PRG
FRQ
1
2
3
DIM CH
456
SPD
REV
7
89
IOC RCD C 0 E
TUNE
TIMER
RCD
VOLUME SYNC
POWER
ON
OFF
FACSIMILE RECEIVER FAX-410
PRG
FRQ
1
2
3
DIM CH
4
5
6
SPD
REV
7
89
IOC RCD C 0 E
TUNE
TIMER
RCD
VOLUME SYNC
POWER
ON
OFF
FACSIMILE RECEIVER FAX-410

Furuno FAX-410 Specifications

General

Brand	Furuno
Model	FAX-410
Category	Fax Machine
Language	English