Need help?Do you have a question about the Furuno FAX-410 and is the answer not in the manual?
Critical safety guidance for users to prevent injury and equipment damage.
Detailed explanation of the unit's controls, indicators, and their functions.
Procedure for the unit to automatically receive facsimile broadcasts.
Procedure for manually receiving facsimile broadcasts or in-progress signals.
Setting up the unit for automatic reception at scheduled times.
Steps to program specific timed reception events for automatic operation.
Adjusting image parameters such as speed, IOC, and phase during recording.
Setting the drum rotation speed and Index of Cooperation (line density).
Function to put the unit into a low-power standby state after a set time.
Configuring the unit's internal clock for accurate timekeeping.
Procedure for storing new facsimile reception channels into memory.
Using Independent Sideband (ISB) for stable reception of frequency-shifting broadcasts.
Using an external receiver for improved signal quality and reception.
Steps for identifying and replacing blown fuses.
Instructions for changing the recording paper roll.
Guidelines and considerations for mounting the main unit.
Recommendations for optimal antenna placement and installation.
Instructions for installing the optional preamplifier unit.
Instructions for connecting the unit's internal and external wiring.
General| Display | LCD |
|---|---|
| Paper Size | A4 |
| Paper Width | 210 mm |
| Paper Capacity | 50 sheets |
| Recording Method | Thermal |
| Receiving Speed | 10 seconds |
| Print Resolution | 200 x 200 dpi |
| Power Supply | AC 100-240V |
| Type | Thermal Fax Machine |
To Next Page
