Furuno FAX-410 User Manual

FURUNO FAX-410
SP - 1 E6261S01E
SPECIFICATIONS OF FACSIMILE RECEIVER
FAX-410
1 RECEIVER
1.1 Receiving system Synthesized double super-heterodyne
1.2 Frequency range MF/HF 2.0000 to 24.9999 MHz
1.3 Mode of reception F3C
1.4 Selectivity 2.0 kHz at -6 dB
1.5 Number of channels 314 channels (150 pre-set channels, 164 user channels)
1.6 Sensitivity MF/HF 2µV at 20 dB SINAD
1.7 Channel selection Automatic or manual, digital with numeric keys
1.8 Tuning indicator 3 LEDs
1.9 Display LCD, 32 characters in 2 lines
1.10 External signal input 1500 Hz (black) and 2300 Hz (white), FSK or FM signal
2 RECORDER
2.1 Recording system Electronic scanning w/ thermal head
2.2 Index of cooperation (IOC) 576 and 288
2.3 Recording speed 60, 90, 120 scans per minute
2.4 Gradation 9 tones (white, 7 gray levels and black)
2.5 Recording paper Thermal paper (257 mm × 30 m)
2.6 Line density 8 dots/mm (total number of dots: 2016)
3 AUTOMATIC CONTROL
3.1 Start/stop Automatic start or stop by timer program and/or WMO
Standard, remote control signal (or manual)
3.2 Recording rate Automatic selection of recording rate (or manual)
3.3 IOC Automatic selection of IOC by WMO start signal (or manual)
3.4 Phase Automatic selection of phase matching by passing signal
(or manual)
4 POWER SOURCE
12-24 VDC: 2.3-1.15 A
100/115/200/230 VAC: 0.3/0.26/0.15/0.13 A, single phase,
50/60 Hz
5 ENVIRONMENTAL CONDITIONS
5.1 Temperature -10°C to +50°C
5.2 Relative humidity 95% (35°C)
5.3 Degree of protection IPX0
5.4 Vibration 3 mm/480 rpm - 0.2 mm/3000 rpm

Furuno FAX-410 Specifications

General

Brand	Furuno
Model	FAX-410
Category	Fax Machine
Language	English