Need help?Do you have a question about the Furuno FI-3001 and is the answer not in the manual?
General| Brand | Furuno |
|---|---|
| Model | FI-3001 |
| Category | Transducer |
| Language | English |
Understanding how ambient noise impacts transducer performance and gain settings.
Guidelines for selecting the optimal location on the hull for transducer mounting.
Recommendations for transducer placement based on various boat hull types.
Discussion on the use of fairings for level mounting and deadrise angles.
Step-by-step instructions for drilling pilot and main holes in the hull.
Procedures for applying sealant to the transducer housing for a secure fit.
Procedure for verifying the thru-hull transducer for any water leaks.
Instructions for installing and removing the blanking plug for unused ports.
Detailed steps for installing the transducer in cored fiberglass hulls.
Guidance on applying water-based antifouling paint to protect the transducer.
Methods for cleaning the transducer surface to remove aquatic growth.
To Next Page