Furuno FM-8800D/8800S - Jumper Setting for Termination

2. CONNECTIONS
2-7
Jumper Setting for Termination
Note: DMC interface is not used for Russian version.
It is necessary, for termination, to change the jumper setting for remote station or DMC
interface.
Open the unit(s) terminated and change the jumper plugs J2 and J3 to ON position (#2-#3).
(Default setting is OFF position.)
Transceiver
Unit
Junction
Box
Remote
Station
Remote
Station
Remote
Station
Remote
Station
DMC I/F
Remote
Station
Terminated Unit
Note that up to four remote stations can be connected.
DISTRESS
VOLUME
TB1
TB2
05P0782
LINE
TERMINATION
RS-485
TERMINATION
J3
1
3
ON
J2
1
3
ON
J1
Set to ON (#2-3)
for termination.
Remote station RB-8800
Set to ON (#2-3)
for termination.
φ
2- 4.5
Fixing hole
Cable entry
TB1
TB2
05P0798
LINE
TERMINATION
RS-485
TERMINATION
J3
1
3
ON
J1
OFF
1
3
ON
OFF
J2
Remote station RB-8810