Need help?Do you have a question about the Furuno HS-8800 and is the answer not in the manual?
General| Brand | Furuno |
|---|---|
| Model | HS-8800 |
| Category | Cordless Telephone |
| Language | English |
Comprehensive list of menu options for the INTL version, covering user and option menus.
User configurable menu settings for the INTL version.
Comprehensive list of menu options for the Russian version, covering user and option menus.
Specs for DSC protocol, baud rate, modulation, and frequency shift.
Configuration of Self ID, Group ID, Remote Handset ID, and ATIS ID for system identification.
Configuration of user-specific settings like Alarm, Auto ACK, Memory Channel, and Volume.
Configuration of optional system settings like AUTO 1W, CH CONFIG, and SCAN/DW.
Detailed description of the functional blocks of the system, including CPU, TX/RX, and DUPLEXER.
Procedures for adjusting output power, including HI, LOW, and TEMP REDUCE settings.
Procedures for measuring VHF frequency, CH70 output, DSC tone, and spurious emissions.
Information on program files, notes, and setup procedures for software updates.
Step-by-step guide for updating the transceiver unit, handset, and DMC IF programs.
Procedures for performing self-tests and understanding system error messages.
Steps to perform a DSC communication test between two VHF units.
Explanation and procedures for T/A, TEST, and RESET DSP functions within the maintenance menu.
To Next Page
