Furuno PR-241 - Safety Instructions; Safety Symbols and Definitions; General Safety Precautions; Compass Safe Distances

i
SAFETY INSTRUCTIONS
The operator and installer must read the applicable safety instructions before attempting to install
or operate the equipment.
Observe the following compass safe
distances to prevent deviation of a
magnetic compass:
PR-241
Standard
compass
Steering
compass
0.85 m 0.55 m
CAUTION
CAUTION
WARNING
Mandatory ActionProhibitive ActionWarning, Caution
Indicates a condition that can cause death or serious injury if
not avoided.
Indicates a condition that can cause minor or moderate injury if
not avoided.
WARNING
Turn off the power at the
switchboard before beginning
the installation.
Fire, electrical shock or serious
injurycan result if the power is
left on or is applied while the
equipment is being installed.
Be sure that the power supply is
compatible with the voltage
rating of the equipment.
Connection of an incorrect power
supply can cause fire or damage
the equipment.
Use only the specified power
cable.
Fire or damage to the equipment
can result if a different cable is
used.
Ground the equipment to prevent
electrical shock and mutual
interference.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury
can occur.
WARNING
㆙࿌
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
ឤ㟁䛾ᜍ䜜䛒䜚䚹
䝃䞊䝡䝇䝬䞁௨እ䛾᪉䛿䜹䝞䞊䜢㛤䛡
䛺䛔䛷ୗ䛥䛔䚹ෆ㒊䛻䛿㧗㟁ᅽ㒊ศ䛜
ᩘከ䛟䛒䜚䚸୓୍䛥䜟䜛䛸༴㝤䛷䛩䚹
Warning Labels(s)
Warning label(s) is(are) attached to the unit.
Do not remove the label(s). If a label is missing
or damaged, contact a FURUNO agent or
dealer about replacement.
Name: Warning Label 1
Type: 86-003-1011-3
Code No.: 100-236-233-10