Fusion Sport SmartSpeed User Manual (English)

Other manuals for Fusion Sport SmartSpeed

Questions and Answers:

Susan LeAug 3, 2025

What to do if the Fusion Sport SmartSpeed Sports & Outdoors software says 'grabba sleeve disconnected'?

M
Michelle DeanAug 3, 2025
If the SMARTSPEED software displays a “grabba sleeve disconnected” message when started, it could be due to several reasons. First, ensure a complete serial connection between the PDA and the Grabba sleeve by sliding the PDA up in the sleeve and pushing it back down to reconnect. A blue light should flash on the right side of the sleeve if connected correctly. Also, the Grabba sleeve may not be charged; charge the sleeve for a minimum of 30 minutes using a 5V charger only, as SMARTSPEED will not work while the sleeve is connected to USB. Finally, the SMARTLOADER software might still be running. Exit SMARTSPEED and check if SMARTLOADER is running. Close SMARTLOADER and try again.

Leah RoseAug 16, 2025

Why does my Fusion Sport SmartSpeed PDA ask for a password?

C
christophermorganAug 17, 2025
If your PDA asks for a password when turned on, this is due to a Microsoft/HP bug. To resolve this, perform a soft reset by inserting the stylus into the small hole on the left side of the PDA. Note that you must disconnect the Grabba sleeve to see the hole. Also, check the email from Fusion Sport that accompanied the software update, and copy the license.lic file into the program files/Smartspeed folder on the PDA. If you do not have a license file, or the problem persists, contact Fusion head office.

Brand

Model

SmartSpeed