Fusion MS-RA50 - Adding and Removing Presets

ADDING AND REMOVING PRESETS
The RA50 allows you to set up your favorite AMIFM stations as presets for easy recall.
Note: Up to 15 presets can be stored for each radio band.
When you are using the tuner, the Play I Pause, Forward, Backward, and Menu keys provide
special options
to allow you to work with preset frequencies (AMIFM).
0
"
®
8 8
8
Encoder Menu key
Play I Pause
Forward
Backward
To add a new preset:
Do one of the following.
1. Tune the
RA50 to the required frequency.
2. Press and hold down the Play
I Pause key. The message: "Preset saved" is displayed
briefly.
or
1 . Press the Menu key.
2. Turn and then press the Encoder to select Presets> Save current. The message: "Preset
saved" is displayed briefly.
Note: New presets must be unique. If you try to create a preset for the same frequency as an
existing one, the unit displays
the message "Previously saved".
To remove one or more presets:
1 . Press the Menu key.
2. Turn and then press the Encoder to select Presets> Remove preset.
3. Do one of the following (there is no warning
or confirmation prompt before deletion):
• Select Remove
all presets and press the Encoder to remove all current presets.
The message: "Presets removed"
is displayed briefly.
• Select a
preset and press the Encoder to remove the selected preset. The selected
preset is removed from the list.
4. Press the Menu
key (or leave to time out] to exit.
12