the LCD along with the elapsed call time.
4. The ANSWER button will also slowly flash to indicate
you are in a call.
RECEIVING A CALL
1. If there is an incoming call, audio playback from the
current Source will either be Muted or Paused (depending
on the source) and [PHONE IN] will be shown on the
Display along with the Caller ID if it is enabled by the
Phone/Carrier.
2. Press the ANSWER button to accept the call.
3. To Reject the call, press the ESC/END/RGB button
and it will not be answered.
HOW TO END A CALL
Once in a call, press the ESC/END/RGB button to end
the call.
TO REDIAL A NUMBER
1. During normal head unit operation, press the ANSWER
button to call the last number dialled by the paired mobile
phone. [REDIAL] will be displayed on the LCD screen.
2. To confirm press either the ANSWER button again or
ENTER on the Encoder Volume Control. [CALLING] will be
displayed on the LCD screen.
HEAD UNIT / HANDSET CALL TRANSFER
You can transfer the call from the car speakers/head unit
back to the phone during a call by pressing the ANSWER
button for 2 seconds. [TRANSFER] will be displayed on
the LCD display.
Press the ANSWER button again for 2 seconds to
transfer the call back to the head unit.
MEDIA PLAYBACK (CD/
USB/SD/AUX IN)
CD PLAYBACK
You can play the following format CD’s
• Commercially Available pre-recorded CD’s
• CD Recordable (CD-R)
• CD Re-writeable (CD-RW)
• MP3 CD’s
• WMA CD’s
NOTE: Please ensure that the disc contains these file types only.
1. Press OPEN on the front panel to open the flip down panel.
2. Insert a CD with the printed side facing up, then close the
panel. The CD will start playing automatically.
• Press to pause the music playback. Press this button
again to resume music playback. NOTE the volume level
can be adjusted while the unit is paused
• Press the to skip forward to the beginning of the
next or previous chapter/track.
• Press and hold to fast forward or fast rewind
through the track.
3. Press to eject the CD.
To Next Page
Loading...
