EasyManua.ls Logo

Fusion FCD-100M - User Manual

Fusion FCD-100M
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Questions and Answers

  • D
    danahoffmanAug 2, 2025
    Why is there no sound coming from my Fusion Car Receiver?
    • E
      Ethan WeeksAug 2, 2025
      If your Fusion Car Receiver isn't producing any sound, first, make sure the volume isn't set to the minimum. If it is, adjust it to your desired level. Also, check that all wiring connections are properly connected.
  • A
    Ashley EvansAug 7, 2025
    How to troubleshoot a Fusion Car Receiver that has no power?
    • K
      kimphillipAug 7, 2025
      If your Fusion Car Receiver isn't turning on, and the power supply is connected to the accessory circuits, ensure the ignition key is switched to “ACC”. Also, check the fuse; if it's blown, replace it.
  • P
    pnashAug 12, 2025
    What to do if the radio on my Fusion FCD-100M Car Receiver doesn't work?
    • R
      Ryan DavenportAug 12, 2025
      If your Fusion Car Receiver's radio isn't working or the station automatic selection isn't functioning, ensure the antenna cable is firmly inserted. If the signals are too weak, try selecting a station manually.
  • C
    contreraswilliamAug 17, 2025
    Why does the sound skip on my Fusion FCD-100M?
    • J
      John SnowAug 17, 2025
      If your Fusion Car Receiver is skipping sound, adjust the installation angle to be less than 30 degrees. Also, the disc might be dirty or defective. Clean the compact disc, then try playing a new one.
  • J
    jacobthomasAug 22, 2025
    What to do if the operation keys on my Fusion Car Receiver do not work?
    • A
      Amanda BrownAug 22, 2025
      If the operation keys on your Fusion Car Receiver aren't working, the built-in microcomputer might not be operating properly due to noise. Press the RESET button.
  • S
    Samuel CobbAug 28, 2025
    What to do if my Fusion FCD-100M Car Receiver won't load or eject a disc?
    • J
      Jennifer AustinAug 28, 2025
      If your Fusion Car Receiver won't load or eject a disc, first eject any disc currently in the player before inserting another. Ensure the disc is inserted with the label facing upward. If the disc is dirty or defective, clean it or try a new one. If the temperature inside is too high, allow the unit to cool off. If condensation is present, leave the player off for about an hour before trying again.

Summary

LIMITED 1 YEAR CONSUMER WARRANTY

UNIT LAYOUT

Control Identification

Details and functions of each button and control on the unit's front panel.

FEATURES

RESET

Reboots the unit by pressing the reset button to clear issues.

CD OPERATION

SELECTING TRACKS

Step through tracks or use fast reverse/forward by holding buttons.

DIRECT TRACK ACCESS

Enter a specific 2-digit track number for direct playback.

PROGRAM CD TRACKS

Program up to 32 tracks to play in a custom order.

CD OPERATION - CONT

RADIO OPERATION

INSTALLATION

PRE-INSTALLATION NOTE

Remove shipping screws and attach seals before installation to maintain IPX5 rating.

WIRING DIAGRAM

Fusion FCD-100M Specifications

General IconGeneral
USB PortYes
BluetoothYes
RadioAM/FM
DisplayLCD
Output Power50W x 4
CompatibilityAndroid/iOS

Related product manuals