Step 2) Set Program Mix1 with the following. The AILERON (ch1) mixes into the
GEAR (ch5) channel.
Here are the details for step 2)
a) Press MODE and hold to enter setup
b) Press MODE to select program mixes
c) Press the KNOB to select PROG.MIX1
d) Press MODE to bring up the screen above
e) Use the KNOB to turn MIX>ON
f) Go to the next line with the DOWN button
g) Use the KNOB to set MAS>AILE
h) Go to the next line with the DOWN button
i) Use the KNOB to set SLV>FLAP. If the gear knob is to be used, select GEAR here.
Step 3) Set program mix 1
Here are the details for step 3)
To Next Page
Loading...
