FUTABA CGY760R User Manual

Futaba CGY760R/CGY755 is gyro, 3-axis Stabilization System combining AVCS
gyro and head speed governor in one box designed for ybarless helicopters. Its cut-
ting edge MEMS (Micro Electro Mechanical System) sensor design, ultra high-speed
processing speed, and advanced PID control algorithm put it a league of it's own
ahead of all ahead of all other heading hold gyros in size, weight and performance.
• No part of this manual may be reproduced in any form without prior permission.
• The contents of this manual are subject to change without prior notice.
• This manual has been carefully written. Please write to Futaba if you feel that any corrections
or clarications should be made.
• Futaba is not responsible for the use of this product.
I
NTRODUCTION
GPB-1
CGY755
CGY760R
GPB-1
Battery
Battery
Setting
Receiving
Receiving
Setting
Receiver・Gyro・Governor
Receiver
Gyro・Governor
If your gyro is CGY755, ignore the description of the receiver
function in this dotted box.
CGY755 has no receiver function.
CGY760R has a receiver function.
This manual is for both CGY760R with receiver
function and CGY755 without receiver function.

FUTABA CGY760R Specifications

General

Brand	FUTABA
Model	CGY760R
Category	Controller
Language	English

Summary

INTRODUCTION

CGY760R Receiver Function

Details the receiver capabilities of the CGY760R.

CGY755 No Receiver Function

Clarifies that the CGY755 does not have receiver functions.

WARRANTY & REPAIR SERVICE (IN U.S.A.)

Contact Futaba Service Center

Provides phone and email for warranty and repair assistance.

FEATURES

Gyro Section

Details the functionality and specifications of the gyro system.

Governor Section

Explains the features and capabilities of the governor system.

PRECAUTIONS

Meaning of Special Markings

Explains the safety symbols used throughout the manual.

General Safety Warnings

Provides essential safety warnings for product operation.

MOUNTING / PART NAMES / CONNECTING

Mounting Angle

Illustrates the correct orientation and angle for mounting the gyro sensor.

Link Method With Transmitter (FASSTest / T-FHSS)

Connecting The CGY

GX (Gyro) LED

Describes the status indications for the Gyro (GX) LED.

RX (Receiver) LED

Explains the status indications for the Receiver (RX) LED.

S.BUS Channel Setting

Governor Installation

Cooling Fan Modification

Details the necessary modifications to the cooling fan for governor sensor.

FIRST MAP

Connect GPB-1 (Gyro Program Box) And CGY

Instructions on connecting the GPB-1 to the CGY unit.

HOME SCREEN

1. Swash plate type

Setting the swash plate type for the helicopter model.

GPB-1 Screen

DISPLAY screen

Configuration options for the GPB-1 display settings.

RECEIVER (Receiver system setting)

(1) RECEIVER

Setting the receiver system protocol for linking.

GYRO UPDATE (Update mode of CGY)

1. Download CGY760R/CGY755 update file

Instructions for downloading the necessary update file.

BASIC MENU

FLT.TUNE screen

Access to Flight Tuning settings.

SWH.BASIC screen

Access to Swash Basic settings.

RUD.BASIC screen

Access to Rudder Basic settings.

GOV.BASIC screen

Access to Governor Basic settings.

SBUS BASIC screen

Access to S.BUS Basic settings.

SWH. BASIC MENU (SWASH BASIC SETTING)

(1) Setup style

Configures the operational style for swash plate settings.

(2) Gyro Set Dir: Mounting direction

Sets the gyro's orientation based on its physical mounting.

TRANSMITTER ROTOR HEAD GYRO GAIN SET-UP

Using the Remote Gain Functions (roll, pitch and yaw)

Adjusting cyclic gains using transmitter's remote gain functions.

EXPERT MENU

SWH.DETAIL screen

Access to detailed Swash settings.

GOV.EXPERT screen

Access to advanced Governor settings.

GOV. EXPERT MENU (GOVERNOR EXPERT SETTING)

(1) Work Mode: Governor working mode

Selects the operating mode for the governor.

TIPS FOR USING THE GOVERNOR WITH ELECTRIC MODELS

SPECIFICATIONS

CGY760R

Technical specifications for the CGY760R unit.

CGY755

Technical specifications for the CGY755 unit.