59
RUD. BASIC screen 2/2
Go to the menu title of RUD. Basic screen 1/2
(4) Work Mode: Gyro working mode
The available choices are CMT, Normal or AVCS. The CMT mode will al-
low you to select either AVCS or Normal mode via the transmitter. In Nor-
mal mode the gyro will always operate in Normal Rate Mode, and when
AVCS is selected, it will always operate in AVCS Mode. Use the
[
/
+] or [
/
-] key
to select the desired working mode.
Setting: CMT / Normal / AVCS Initial setting: CMT
From 1/2
Go to 1/2 from any cursor position
To Next Page
Loading...
