60
RUD. BASIC screen 2/2
Go to the menu title of RUD. Basic screen 1/2
(4) Work Mode: Gyro working mode
The available choices are CMT, Normal or AVCS. The CMT mode will
allow you to select either AVCS or Normal mode via the transmitter. In
Normal mode the gyro will always operate in Normal Rate Mode, and
when AVCS is selected, it will always operate in AVCS Mode. Use the [
/+] or [ /-] key to select the desired working mode.
Setting: CMT / Normal / AVCS Initial setting: CMT
(5) GY. Gain: Gyro base gain setting
This parameter sets the base gain of the gyro. This can be used to ad-
just the gain % if your actual transmitter gain does not match the gain on
the CGY correctly. Use the [
/+] or [ /-] key to setting the gain.
Setting ranges: 0 ~ 150% Initial value: 100%
From 1/2
Go to 1/2 from any cursor position
To Next Page
Loading...
