Futon Life Tri-fold with Arms User Manual

Parts List:
# cotter pins # clevis pins
# stretchers
The Tri$fold with Arms
Laying out all the parts and hardware and identifying
each part as shown may help as you assemble your frame!
NOTE: This frame and The Bi$fold with Arms share similar
assembly instructions for the arms and stretchers!
# arm assemblies
# sliders
% conformats
& allen wrench
% barrel nuts
& slat rack assembly with three sections

Futon Life Tri-fold with Arms Specifications

General

Brand	Futon Life
Model	Tri-fold with Arms
Category	Indoor Furnishing
Language	English

Summary

Futon Frame Parts

Assembly Instructions

Connect Stretchers to Arms

Secure stretchers to arm assemblies using barrel nuts and conformats, keeping initial connections loose.

Attach Slat Rack Rollers

Affix slide rollers to the middle slat rack section using clevis pins and cotter pins.

Position Slat Rack in Frame

Lower the slat rack into the frame, aligning the slide rollers with the grooves on the arms.

Finalize Frame Tightening

Tighten all frame stretchers once the deck is properly aligned, cautioning against over-tightening.

Fold Frame to Sitting Position

Fold the assembled frame into its sitting configuration and place the futon mattress.