Future light CP-256 MST - Problem Chart; Cleaning and Maintenance; Technical Specifications

00031823.DOC, Version 1.0
62/62
All DATA from controller to pendrive
Select this menu and press ENTER. The controller will ask to file name, you have to give. After giving name
press ENTER. The copy process will start, and takes about 8 minutes. Under process the controller can not
be switched off!
W
e can offer you to save all data to pendrive or pc after you made a show. Maybe later to visit the same
place you can simply load the data and you are ready to make a show.
7. PROBLEM CHART
PROBLEM: CAUSE: REMEDY:
No power. The power unit is not connected. Check the connection cable of the
power unit and any extension-cables.
Cannot enter main menu. Forgot code or wrong input. Open the envelope with the Master
Code and follow the instructions.
The color or gobo cannot
be saved in the Preset
Macro.
The controller could not save the
settings.
Please enter the settings again and
save every projector individually.
The program cannot be
edited.
The last scene has not been saved. Check if all scenes of the program are
available. Edit the program again and
save the last scene by pressing the
Enter-button.
The individual scenes are
not displayed when editing
a program.
The Recall-button has not been
pressed.
Press the Recall-button in order to
display the saved scene.
8. CLEANING AND MAINTENANCE
Disconnectfrommainsbeforestartingmaintenanceoperation!
DANGERTOLIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
9. TECHNICAL SPECIFICATIONS
Power supply: 230 V AC, 50 Hz ~
via 12-15 V DC, 500 mA power unit included in the delivery
Power consumption: 6 W
Number of control-channels: 512
Sound-control: either via ¼” Jack or built-in microphone
Sound-input: ¼” stereo Jack
Audio-sensitivity: 0.3 - 1 V
DMX 512-output: 3-pin XLR-connector
Free chasers: 64
Dimensions (LxWxH): 483 x 132 x 83 mm
19" mounting dimensions with 4 u
Minimum mounting depth: 90 mm
Weight: 3,6 kg
Please note: Every information is subject to change without prior notice. 17.12.2007 ©