Check your camera signal strength
Recommended height to install the camera
If your camera get numerous motion alerts unexpected
1) Please adjust your camera installation angle a bit down to focus the
motion area.
2) Please change your PIR sensitivity to Low to reduce the PIR
sensitivity.
3) Do not install the camera with nearby bushes,shrubs,
grasses and tree leaves coming into the PIR range.
1
Camera
Check in App
WiFi extender
Router
If not satisfied with video smoothness,
and signal strength in App is not strong,
we would suggest adding wifi extender
between the Router and the camera.
2
We suggest installing the camera about 8ft. You
may adjust the camera angle physically according
to the live view in your mobile. to focus your
motion area to get the more accurate motion
triggered events.
To Next Page
Loading...